Settings
87
Programme info
Programme names and load quantities
that light up in the display when the
programme is selected with the
programme selector can be switched
off.
Options
–
Off
(Programme name and load size
are not displayed)
–
Programme name
(The load size is not
displayed)
–
Prog. & max load
(Both are displayed,
factory setting)
Miele@home
Control the networking of your dryer
with your home Wi-Fi network.
The following points may appear in the
submenu:
–
Set up
This message only appears if the dryer
has not yet been connected to a Wi-Fi
network.
Please refer to “Before using for the first
time” for instructions on how to set up
the connection.
-
Deactivate
(visible if Miele@home is
activated)
Miele@home remains set up, the Wi-Fi
function is switched off.
-
Activate
(visible if Miele@home is
deactivated)
The Wi-Fi function is reactivated.
-
Connection status
(visible if
Miele@home is activated)
The following values are displayed:
– the quality of Wi-Fi reception
– the network name
– the IP address
-
Set up again
(visible if set up)
Resets the Wi-Fi login (network) to
immediately re-establish a new
connection.
-
Reset
(visible if set up)
– The Wi-Fi is switched off.
– The Wi-Fi connection will be reset to
the factory setting.
Miele@home is no longer set up. In
order to use Miele@home again, a new
connection must be established.
Summary of Contents for TCJ 690 WP
Page 90: ......
