![Miele SmartLine CS 7612 FL Operating And Installation Instructions Download Page 50](http://html.mh-extra.com/html/miele/smartline-cs-7612-fl/smartline-cs-7612-fl_operating-and-installation-instructions_234466050.webp)
Problem solving guide
50
General problems or technical faults
Problem
Possible cause and remedy
The SmartLine
appliance cannot be
switched on.
There is no power to the SmartLine appliance.
Check if the circuit breaker has tripped. Contact
an electrician or Miele (for the minimum fuse
rating, see data plate).
There may be a technical fault.
Disconnect the SmartLine appliance from the
mains electricity supply for approx. 1 minute by
– switching off at the wall socket and withdrawing
the plug, or
– switching off the main circuit breaker or residual
current device.
If, after resetting the fuse in the mains fuse box or
the residual current protection device, the
SmartLine appliance will still not switch on,
contact a qualified electrician or Miele.
A smell and vapours are
given off when the new
appliance is being used.
The metal components have a protective coating.
When the appliance is used for the first time, this
causes a smell and possibly also vapour. The
material from which the induction coils are made also
gives off a smell in the first few hours of operation.
This smell will be less noticeable with each
subsequent use before dissipating completely. The
smell and any vapours given off do not indicate a
faulty connection or appliance and they are not
hazardous to health.
An operating noise can
be heard after the
SmartLine appliance
has been switched off.
The cooling fan runs until the SmartLine appliance
has cooled down and then switches off
automatically.
Summary of Contents for SmartLine CS 7612 FL
