Miele SmartLine CS 7612 FL, Operating And Installation Instructions

Page: 40 / 80

Safety features
40
Safety switch-off
Sensor controls are covered
Your SmartLine appliance will turn off
automatically if one or several of the
sensor controls remain covered for
longer than 10 seconds, for example,
by finger contact, food boiling over, or
by an object such as an oven glove or a
tea towel.
 flashes briefly above the
 sensor control and a tone will sound.
If you remove the obstruction and/or
clean the appliance,

will go out and
the SmartLine appliance is ready for
use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator for
that zone appears. If you switch the
cooking zone on and off again, it is
ready for operation again.
The cooktop is programmed to safety
setting 0 at the factory. If required, you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
Power level* Maximum operating time
[h:min]
Safety setting
0** 1 2
1 10:00 8:00 5:00
1. 10:00 7:00 4:00
2/2. 5:00 4:00 3:00
3/3. 5:00 3:30 2:00
4/4. 4:00 2:00 1:30
5/5. 4:00 1:30 1:00
6/6. 4:00 1:00 00:30
7/7. 4:00 00:42 00:24
8 4:00 00:30 00:20
8. 4:00 00:30 00:18
9 1:00 00:24 00:10
* The power levels with a dot after the
number are only available if the power level
range has been extended (see “Power level
range”).
** Factory default setting