Miele SmartLine CS 7612 FL, Operating And Installation Instructions

Page: 34 / 80

Timer
34
The SmartLine appliance has to be
switched on if you wish to use the
timer.
The timer can be used for the following
2 functions:
- For setting the minute minder
- For automatically switching off a
cooking zone/heating element/
Teppanyaki zone
You can use the functions
simultaneously.
A duration of between 1 minute (
:
)
and 9 hours 59 minutes (
:
) can be
set.
Durations of up to 59 minutes are
shown in minutes (00:59) and durations
of more than 60 minutes are shown in
hours and minutes. Durations are
entered in the order of hours, followed
by minutes in tens and then units.
Example:
59 minutes = 0:59 hours,
Enter: 5-9
80 minutes = 1:20 hours,
Enter: 1-2-0
After the first number has been entered,
the timer display will light up constantly.
After the second number has been
entered, the first number will move to
the left. After the third number has been
entered, the first and second numbers
will move to the left.
Minute minder
The minute minder is set using the
numerical keybank for the left or front
left cooking zone (depending on model).
Setting the minute minder

Touch the

sensor.
The timer display flashes.

Set the required time.
Touch the

sensor or wait 10 seconds
to start the minute minder.
Changing the time set for the minute
minder
 Touch the  sensor.
The timer display flashes.

Set the required time.
Cancelling the minute minder
 Touch the  sensor.

Touch

on the numerical keybank.