Miele PWT 6089 Vario Operating And Installation Instructions Download Page 16

Page: 16 / 96

Control panel

Right-hand side for the washer-extractor, left-hand side for the tumble dryer

Display

See the following pages for more information.

Short cut buttons

For selecting an individual program quickly. These buttons can be programmed
to select your own favorite programs.

Start

button

Optical interface PC

This is used by service technicians to run diagnostic checks on your appliance.

Jog shuttle

This is used to select menu options (by turning it) and to confirm your selection
(by pressing it).

On-Off

button

, washer-extractor

On-Off

button

, tumble dryer

Before using for the first time

Ensure that it is correctly installed and connected. See "Installation and
connection". Also check that the drain filter on the washer-extractor is securely
tightened to prevent the risk of leaks during use.

Commission the appliance as described in the separate booklet "Commissioning,
program chart and Settings" supplied.

Operating the washer-extractor and tumble dryer stack

Summary of Contents for PWT 6089 Vario

































































































Search results

Summary of Contents for PWT 6089 Vario

Reviews:

Miele PWT 6089 Vario, Operating And Installation Instructions, Page: 16 / 96

Search results

Summary of Contents for PWT 6089 Vario

Reviews: