6. Starting a program – end of a program
30
Payment system (If applicable)
If your machine is connected to a
payment system, the amount of
payment required will appear in the
display.
Do not cancel the program once it has
started. Depending on the settings,
money may be lost in the payment
system.
Starting a program
The program can be started as soon as
the
Start/Stop
sensor control is flashing
on and off.
Touch the
Start/Stop
sensor control.
The door will lock (
symbol) and the
program will start.
If a delay start period has been
selected, this will appear in the display.
The program duration will appear in the
display either after the delay start time
has elapsed or immediately after the
start of the program. The program
sequence is also shown in the display.
Useful tip:
You can use the pull-down
menu to display the selected
temperature, spin speed, and any
selected Extra options.
End of program
The door remains locked during the
anti-crease phase. However, the
washing machine door can be unlocked
at any time by touching the
Start/
Stop
sensor.
Removing the laundry
Pull open the door.
Remove the laundry.
Items left in the drum could shrink or
discolour other items in the next
wash.
Remove all items from the drum.
Check the door seal for any foreign
objects.
Useful tip:
Leave the door slightly open
to allow the drum to dry.
Switch the washing machine off with
the
button.
If applicable, remove the used cap
from the detergent drawer.
Useful tip:
Leave the detergent drawer
slightly open to allow it to dry.
