en - Problem solving guide
33
Error messages
Repairs should only be carried out by a Miele authorised technician.
Unauthorised or incorrect repairs can cause unforeseen danger to users.
If an error occurs in a programme or a language, this is identified in the display by the
symbol and the programme or language can no longer be selected.
1
2
3
0%
0%
20%
Cottons damp
Cottons extra dry
Cottons dry
Settings
Language
english (GB)
Back
español
<-
The controls run a system analysis each time the appliance is switched on and each time
it returns to the programme list. All modules and their sensors, data from the operating
system, drying programmes and languages are checked.
If an error occurs in a currently selected language, the following error message appears:
Function restricted.
Language defect.
Data fault
Malfunctions occurring before or after the start of a programme will flash in the display.
Fault diagnosis
Message
Cause and remedy
The display remains dark.
There is no power to the tumble dryer.
Check the mains plug, main switch and fuses (on site).
Fan fault
Programme stopped. Press
start. Motor overheating.
The motor temperature is too high.
Allow the motor to cool down.
Machine fault
Call the Service Department if
mains interruption does not
work.
A tumble dryer error occurred.
Disconnect the tumble dryer from the power supply, wait
a moment and then reconnect the power supply.
If the error is still showing in the display, call Service.
Summary of Contents for PT 8257 WP
Page 49: ...en Dimensions 49 PT 8257 WP PT 8337 WP ...
Page 103: ...nl Afmetingen 103 PT 8257 WP PT 8337 WP ...
Page 107: ......
