manualshive.com logo in svg

Miele ProLine CS 1013-1, Operating And Installation Instructions

The Miele ProLine CS 1013-1 is a high-quality and durable appliance that caters to all your cooking needs. With its sleek design and advanced features, it guarantees a top-notch culinary experience. Ensure its optimal performance by referring to the comprehensive Operating and Installation Instructions manual available for free download from manualshive.com.

Share
Download
background image

Installation

*INSTALLATION*

39

Installation notes

Sealing between the ProLine
appliance and the worktop

The ProLine appliance and the
worktop may be damaged if the
appliance needs to be removed after
it has been sealed with a sealant. Do
not use any sealant between the
ProLine appliance and the worktop.
The sealing strip under the edge of
the top part of the appliance
provides a sufficient seal for the
worktop.

Tiled worktop

Grout lines 

 and the hatched area

underneath the ProLine appliance frame
must be smooth and even. If they are
not, the ProLine appliance will not sit
flush with the worktop and the sealing
strip underneath the top part of the
appliance will not provide a good seal
between the appliance and the
worktop.

Summary of Contents for ProLine CS 1013-1





























































Reviews:

No comments

Related manuals for ProLine CS 1013-1

ICI Caldaie NEOX125 Manual Of Installation - Use - Maintenance preview
NEOX125
Brand: ICI Caldaie Pages: 112
Eclipse Linnox SP CCS-LS Installation Manual preview
Linnox SP CCS-LS
Brand: Eclipse Pages: 22
baltur BGN 200 P Instruction preview
BGN 200 P
Brand: baltur Pages: 115
Unigas G10 Manual Of Installation - Use - Maintenance preview
G10
Brand: Unigas Pages: 28
Planika Cabo Installation Manual preview
Cabo
Brand: Planika Pages: 44
Wolf Dual Fuel Range Installation Manual preview
Dual Fuel Range
Brand: Wolf Pages: 32
Officine Gullo DWFS4 Instructions For Installation And Use Manual preview
DWFS4
Brand: Officine Gullo Pages: 16
Xo XOGSIDEBXLT Care & Use/Installation Manual preview
XOGSIDEBXLT
Brand: Xo Pages: 36
Unigas PN91 Manual Of Installation - Use - Maintenance preview
PN91
Brand: Unigas Pages: 48
Comfort Flame MFBOD24NM Installation And Operation Instructions Manual preview
MFBOD24NM
Brand: Comfort Flame Pages: 32
Beef Eater DISCOVERY 1100 Assembly Instructions Manual preview
DISCOVERY 1100
Brand: Beef Eater Pages: 8
Beef Eater 7000 Series Assembly And Operating Instructions Manual preview
7000 Series
Brand: Beef Eater Pages: 76
Alfresco SC93MAN02 Assembly & Operating Manual preview
SC93MAN02
Brand: Alfresco Pages: 7
Town & Country Fireplaces TCWS54D Installation Manual preview
TCWS54D
Brand: Town & Country Fireplaces Pages: 40
Riello BS1D Manual preview
BS1D
Brand: Riello Pages: 36
Riello C9514300 Installation, Use And Maintenance Instructions preview
C9514300
Brand: Riello Pages: 48
Riello DB4 SM C01 TC A180 FS1 T250 Installation, Use And Maintenance Instructions preview
DB4 SM C01 TC A180 FS1 T250
Brand: Riello Pages: 64
Riello C9334500 Installation, Use And Maintenance Instructions preview
C9334500
Brand: Riello Pages: 52

Brands by name

Popular brands

Load more brands