Miele PG 8131i Operating Instructions Manual Download Page 77

Page: 77 / 92

Settings menu

Settings menu for changing
standard settings

Open the Settings menu



Switch the dishwasher on with the



button if it is switched off.



Open the Settings menu with the



button.

The first option in the Settings menu will
appear in the display.

See “Display” for more information
about the display and controls.



Use the



arrow buttons under-

neath the display to select the option
you want to change and confirm your
selection with

Sub-menu options which have already
been selected will have a tick



be-

side them.



To exit a sub-menu, use the



ar-

row buttons to select

Back 

and

confirm with

The display will revert to the menu
above.

Language



The display can be set to appear in one
of several different languages.

You can change the language in the
display via the

Language 

sub-menu.



Select the language you want as well
as the country, if appropriate, and
confirm with

The flag after the word

Language 

serves as a guide if a language that
you do not understand has been set.
In this case keep selecting the option
which has a flag after it until you reach
the

Language 

submenu.

Summary of Contents for PG 8131i





























































































Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands

Miele PG 8131i, Operating Instructions Manual

Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands