Problem solving guide
63
General problems
Problem
Cause and remedy
The indicator lights and
the display are dark.
The display has switched off automatically to save
energy.
Switch the dishwasher on again with the
but-
ton.
The interior lighting
does not come on when
the door is opened.
The interior lighting has been switched off perman-
ently.
Switch the lighting back on again (see “Settings
menu, BrilliantLight”).
Detergent residue is left
in the dispenser at the
end of a programme.
The dispenser was still damp when detergent was ad-
ded.
Make sure the dispenser is dry before adding de-
tergent.
The detergent dis-
penser lid cannot be
closed properly.
Residual detergent is blocking the catch.
Remove the detergent.
At the end of a pro-
gramme there is a film
of moisture on the in-
side of the door and the
interior cabinet walls.
This is not a fault.
It is caused by the drying system.
The moisture will dissipate after a short while.
Water remains in the
wash cabinet at the end
of a programme.
Before rectifying the problem:
Switch the dishwasher off with the
button.
The filter combination in the wash cabinet is clogged.
Clean the filter combination (see “Cleaning and
care, Cleaning the filters”).
The drain pump or the non-return valve is blocked.
Clean the drain pump or the non-return valve (see
“Maintenance”).
The drain hose is kinked.
Remove any kink from the drain hose.
Summary of Contents for PG 8131i
Page 39: ...Loading the dishwasher 39 Cutlery basket Heavily soiled items ...
Page 91: ......
