Miele PG 8131i Operating Instructions Manual Download Page 57

Page: 57 / 92

Cleaning and care

Cleaning the spray arms

Particles of food can get stuck in the
spray arm jets and bearings. The spray
arms should therefore be checked and
cleaned regularly.



Switch the dishwasher off.

Remove the spray arms as follows:



Take out the cutlery tray (if your dish-
washer is fitted with one).



Push the

upper

spray arm upwards

to engage the inner ratchet. Then un-
screw the spray arm.



Push the

middle

spray arm upwards



to engage the ratchet. Then un-

screw the spray arm





Remove the lower basket.



Pull the

lower

spray arm firmly up-

wards to remove it.



Use a pointed object to push food
particles into the spray arm jets.



Rinse the spray arms thoroughly un-
der running water.



Replace the spray arms and check
that they rotate freely.

Summary of Contents for PG 8131i





























































































Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands

Miele PG 8131i, Operating Instructions Manual

Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands