Miele PG 8131i Operating Instructions Manual Download Page 27

Page: 27 / 92

Before using for the first time



Add rinse aid only until it is visible in
the opening.

The rinse aid reservoir holds ap-
prox. 110 ml.



Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a pro-
gramme.



Wipe up any spilled rinse aid. This
prevents over-foaming occurring dur-
ing the next programme.

You can adjust the rinse aid dosage
for best results (see “Settings menu,
Rinse aid”).

Rinse aid refill reminder

When the



Add rinse aid

message ap-

pears, the reservoir contains sufficient
rinse aid for 2 - 3 programmes only.



Add rinse aid in plenty of time.



Confirm with

The refill reminder will go out.

If you do not want the salt and rinse
aid reminders to appear, you can
switch off both refill reminders for salt
and rinse aid if you wish (see “Settings
menu - Switching off the refill remind-
ers”).

Summary of Contents for PG 8131i





























































































Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands

Miele PG 8131i, Operating Instructions Manual

Search results

Summary of Contents for PG 8131i

Reviews:

Related manuals for PG 8131i

Brands by name

Popular brands