Settings menu
89
2nd interim rinse
You can increase the cleaning
performance in the case of stubborn
soiling by selecting a second interim
rinse. This function is not available for
all programs (see “Program overview”).
Select the setting you want and
confirm with
OK
.
Brightness
There are seven different display
brightness settings.
Select the brightness you want and
confirm this with
OK
.
Memory
When the memory function is switched
on, the most recently selected program
is saved.
When you switch the dishwasher off
and back on again, the program menu
for the last program selected will appear
in the display instead of the
ECO
program.
Select the setting you want and
confirm with
OK
.
Refill indicators
If you consistently use a Tab detergent
and the refill indicators for salt and rinse
aid are bothering you, you can
deactivate them if you wish.
Select the setting you want and
confirm with
OK
.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add
reactivation salt and rinse aid and to
switch the indicators back on.
Check filters
You can adjust the interval at which the
reminder to check the filters appears.
You can set an interval of between 30
and 60 program cycles.
The reminder to check the filters is set
at the factory to appear after every 50
program cycles.
Select the interval you want and
confirm this with
OK
.
