Electrical connection
72
The PG 8130 U / PG 8130i comes
equipped with a 14/3 AWG cord for
connection to a standard AC 120 V,
60 Hz power outlet with a NEMA 5-15P
plug.
If available, the dishwasher may be
connected to a 2N AC 120/208-240 V,
60 Hz power supply. This will increase
the power to the heating elements and
shorten the time of selected wash
cycle.
120 V
208 –
240 V
Rated load
(kW)
1.5
3.9 – 4.2
Fuse rating
15 A
30 A
To connect the machine to a 2N AC
120/208-240 V supply, the standard
power cord must be removed and
replaced by a 10/4 AWG cable of the
type: S, SE, SO, SOO, ST, STO or
STOO. A 3-pole, 4-wire grounding plug
and receptacle are recommended
(NEMA Type 14-30P).
The conversion diagram and wiring
diagram are secured to the inner side of
the base cover.
Removing the toe kick
Disconnect the machine from the
electrical supply.
Remove the fixing screws from the
toe kick and take it off.
Power connection options
