Settings menu
84
Module settings
We recommend connecting your
dishwasher to your WiFi network with
the help of the MielePro@mobile app or
via WPS.
If you would rather set up the
connection to your router yourself, or
you have a special network
configuration, you can enter the
relevant settings yourself if you have the
necessary technical knowledge.
Start module activity
If you wish to reset all entered settings
and values for Miele@home, you can
restore the factory default settings on
your WiFi module. Any settings that do
not affect Miele@home will remain
unchanged.
Select
Default settings
and confirm
with
OK
.
Please wait
will appear in the display.
The message
Module status: Process
successful
will appear in the display after
a few minutes.
Confirm the message with
OK
.
The WiFi module factory default
settings have been restored.
If the factory default settings were not
restored to your WiFi module, repeat
the instructions above.
2nd interim rinse
You can increase the cleaning
performance in the case of stubborn
soiling by selecting a second interim
rinse. This function is not available for
all programmes (see “Programme
chart”).
Select the setting you want and
confirm with
OK
.
Brightness
There are seven different display
brightness settings.
Select the brightness you want and
confirm this with
OK
.
Refill indicators
If you consistently use a multi-purpose
Tab detergent you can deactivate the
refill reminders for salt and rinse aid if
you wish.
Select the setting you want and
confirm with
OK
.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to add salt
and rinse aid and to switch the
reminders back on.
Summary of Contents for PG 8110 SmartBiz
Page 35: ...Preparing the load items 35 Cutlery basket Heavily soiled items ...
Page 87: ......
