Miele PG 8058 Operating Instructions Manual Download Page 17

Page: 17 / 124

Operation tips

Menus

This dishwasher is controlled by menus. The menus are displayed in
a 3-line display on the control panel.

Example:

Language 

;

(

english (GB)

deutsch

The name of the menu and a maximum of two options are shown.
The currently selected option is highlighted.

Simple selection

Delay start

Yes

(

The arrow buttons



and



are used for navigating within the menu.

The highlighted option is selected by pressing the

button. Once

selected, the option will have a tick



beside it. Other options are

automatically deselected.

Press the

button to progress to the next menu, or to the next

input position when confirming values. Press the



button to revert

to the previous menu without saving the entry.

Multiple selection

Release programme

Short

Universal

;

The



and



arrow buttons are used for navigating within the menu.

Several options can be selected in succession within the menu using
the

button. Once selected, an option will have a tick



beside it.

To save your selection, select

and confirm with the

button.

Summary of Contents for PG 8058





























































































































Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands

Miele PG 8058, Operating Instructions Manual

Search results

Summary of Contents for PG 8058

Reviews:

Related manuals for PG 8058

Brands by name

Popular brands