Miele PG 8058 Operating Instructions Manual Download Page 11 | Manualshive

Page: 11 / 124

background image

Warning and Safety instructions

11

Correct use



This dishwasher is designed for operation with water and cleaning

agents suitable for use in commercial dishwashers only. Organic
solvents and flammable liquid agents must not be used in it.
This could cause an explosion, damage rubber or plastic components
in the dishwasher and cause liquids to leak out of it.



Only use cleaning agents formulated for use in commercial

dishwashers. Using unsuitable cleaning agents could adversely affect
components in the dishwasher, as well as items being cleaned.



Do not sit or lean on the opened door. This could cause the

dishwasher to tip up and be damaged or cause an injury.



After any plumbing work the water pipework to the dishwasher will

need to be vented. If this is not done, components can be damaged.



Please be aware that the dishwasher may be operating at high

temperatures. If the door is opened there is a danger of burning or
scalding. Crockery, cutlery, baskets and inserts must be allowed to
cool down before they are unloaded. Any water remaining in
containers could still be very hot. Empty them into the wash cabinet
before taking them out.



The water in the cabinet must not be used as drinking water.



Pre-treating items (for example with washing-up liquid and other

cleaning agents) as well as some types of soiling and some cleaning
agents can cause a build-up of foam in the wash cabinet. Foam can
have an adverse effect on the cleaning result.



Foam escaping from the wash cabinet can cause damage to the

dishwasher. If foam escapes the programme must be cancelled
immediately.



When using cleaning agents and specialised products, it is

essential that the manufacturer's instructions are followed. Cleaning
agents must only be used for the purpose they are designed for and
in the situation specified, to avoid such dangers as serious chemical
reactions and material damage (e.g. oxyhydrogen explosion).



Do not inhale or ingest powder cleaning agent. Dishwasher

cleaning agents contain irritant or corrosive ingredients which can
cause burning in the nose, mouth and throat if swallowed, or inhibit
breathing. Seek medical attention immediately if cleaning agent has
been swallowed or inhaled.



Miele cannot be held liable for any effect chemical cleaning agents

may have on the material of the items being cleaned. Observe the
cleaning agent manufacturer's instructions with regard to storage
conditions, use and dosage.

«
...
9
10
11
12
13
...
»

Summary of Contents for PG 8058





























































































































Reviews:

No comments

Related manuals for PG 8058

Brand: Haier Pages: 20

Millennia EDW24

Brand: Dacor Pages: 16

Brand: Samsung Pages: 40

WF16J9000K Series

Brand: Samsung Pages: 52

Brand: Samsung Pages: 44

WF16J9800K Series

Brand: Samsung Pages: 54

Brand: Samsung Pages: 44

Brand: Samsung Pages: 48

Brand: Samsung Pages: 44

Brand: Samsung Pages: 132

Brand: Samsung Pages: 40

Brand: Hoover Pages: 104

Conservator 3955874A

Brand: Crosley Pages: 8

Brand: arcelik Pages: 32

Brand: NEFF Pages: 52

Brand: Smeg Pages: 30

Brand: Elba Pages: 26

Brand: FAR Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands