Drying
27
If the Anti-crease
* extra has been selected, the drum continues to rotate in intervals
after the end of the programme. This reduces creasing if the laundry cannot be removed
straight away.
* The Anti-crease function is switched off as the factory default setting and can be activ-
ated in the Supervisor level.
Removing the laundry
Open the door.
Remove everything from the drum.
Items left in the tumble dryer could be damaged by overdrying when the tumble dryer is
used the next time.
Always remove all items from the drum.
Switch the tumble dryer off by pressing the
button.
Care notes
This tumble dryer requires regular maintenance, particularly if it is used on a continuous
basis. Please see “Cleaning and care” for details.
Timer
Prerequisite for setting the timer
The Delay start must be activated in the Supervisor level in the Controls / Display menu so
that the Timer can be selected. Before the programme starts, the Timer can be used to se-
lect a programme start time or programme end time.
Setting the timer
Touch the
Timer
sensor control.
Select the
Finish at
,
Start in
or
Start at
option.
Set the hours and the minutes and confirm your entry with the
OK
sensor control.
Summary of Contents for PDR 914
Page 2: ...2 ...
