Supervisor level
83
Special programmes
You can put together 5 special
residual moisture or time-controlled
programmes and assign your own
programme names.
First, enter the programme name.
Select the special programme you
want to change.
The
Save as
menu opens.
Use the letters and symbols below
the line to enter the name.
Touch the
Save
sensor.
You can now enter the parameters for
a
Res. moisture
programme
or
Timed drying
.
The 5 special programmes are pre-
programmed at the factory, see
“Supervisor level”. You can change
these special programmes.
The special programmes are added to
the programme packages. Enter the
names and settings of your special
programmes into the “Special
programmes” table at the end of the
“Programme chart”.
Res. moisture programme
–
Final residual moisture
:
- 6% (dry) – 40% (damp)
–
Extra drying time
:
0 – 60 minutes
–
Temperature
(Process air):
cold – 60°C
–
Holding phase
–
Holding time
:
0 – 60 minutes
–
Holding temperature
(Process air):
cold – 60°C
–
Cooling down temp.
(Process air):
40 – 55°C
–
Anti-crease
–
Drum rotation main direction
:
0 - 500 seconds
–
Pause
:
100 - 3000 seconds
–
Drum reversal
:
0 - 500 seconds
Timed drying
–
Running time
:
1 – 120 minutes
–
Temperature
(Process air):
cold – 60°C
–
Cooling down temp.
(Process air):
40 – 55°C
–
Anti-crease
–
Drum rotation main direction
:
0 - 500 seconds
–
Drum reversal
:
0 - 500 seconds
–
Pause
:
100 - 3000 seconds
