manualshive.com logo in svg

Miele PDR 507 HP, Operating And Installation Instructions

Share
Download
Miele PDR 507 HP Operating And Installation Instructions Download Page 33

4. Selecting programme settings

33

Selecting Delay start

Delay start must be activated in the
Supervisor level for it to be able to be
selected. In this case, one of these 3
symbols will also light up in the
display: 

, , 

.

Normal

Cottons

1:43

h

Touch the sensor with the clock
symbol.

Depending on the Delay start settings in
the Supervisor level, different delays
can be selected in 15-minute
increments:

– The programme finish time: 

 Finish

at

– The programme start time: 

 Start at

– The time until the programme starts:

 Start in

The maximum Delay start period is 24
hours. The left-hand side of the
display shows what you are able to
enter.

Start at

OK

15

:

2

h

Touch the 

 or 

 sensor to select

the hours and/or minutes.

Touch the 

OK

 sensor.

If the Delay start time is set to 

 Finish

at

 or 

 Start at

, the current times will be

displayed.

Touch the 

OK

 sensor.

Delay start begins when you start the
programme.

Changing/cancelling Delay start

Before the programme starts

Touch the sensor with the clock
symbol.

You can change or delete the time.

After the programme has started

Touch the 

Start/Stop

 sensor.

You can either cancel the programme
or start it straight away.

Summary of Contents for PDR 507 HP





























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands