Supervisor level
70
Fault alarm
The audible signal that indicates an er-
ror can be switched off.
– Factory default: On
– Off
Memory
The tumble dryer saves the settings
that were last selected for a drying
programme (drying stage and/or extra
option, or the duration for some pro-
grammes).
– Factory default: Off
– On
Anti-crease
At the end of the programme, the
drum will continue to rotate at intervals
if the laundry is not removed immedi-
ately.
Changing this setting leads to increased
energy consumption.
The setting
can be switched off or a
time between 1 and 12 hours can be
selected.
Factory default: Off
Further cooling
Before the end of the programme, the
temperature of the dried laundry is
monitored and the cooling phase at
the end of the programme is extended
if necessary.
Changing this setting leads to increased
energy consumption.
– Factory default: Off
– On
Cooling down temperature
The laundry will be cooled down auto-
matically before the end of the pro-
gramme. The automatic cooling-down
phase which takes place before the
end of a programme can be set at a
cooler level for all programmes. This
means that the cooling phase is exten-
ded.
Changing this setting leads to increased
energy consumption.
The setting can be changed from
40 °C–55 °C.
Factory default: 55 °C
