en - Using the machine
48
Changing the op-
erating status
If you wish to change the operating status, you can switch between
Ready for operation
,
Flow
(if selected via option),
Manual operation
/
CO2 operation
,
ThermoControl active
and
Fan run-on
at any time.
Press the
button repeatedly until you reach the desired operating
status.
Tip:
If you wish to clean the filter manually via Miele ThermoControl,
press the
button repeatedly until you reach the
ThermoControl act-
ive
operating status. Relevant pathogens will then be deactivated in
the filter by Miele ThermoControl. After Miele ThermoControl, the fan
keeps running automatically in order to cool down the filter safely,
after which the appliance switches back to the
Ready for operation
operating status.
Displaying oper-
ating values
The operating values of the air purifier can be displayed via the
Oper-
ating values display
menu.
Press and hold the
button for more than 3 seconds.
1245
523
V01.1
14:28:00
Operating values display
Operating hours
Time to filter change
Miele
Mon
09.11.2020
PAC 1080
h
h
The
Operating values display
menu is now displayed.
25
22
34
14:28:00
Operating values display
Filter saturation
Room temp.:
ThermoControl temp.
Mon
09.11.2020
%
°C
°C
Press the
or
button briefly to scroll through the pages of the
Operating values display
menu.
To exit the operating values display, briefly press the
and
but-
tons at the same time (<1 sec) or wait 10 seconds.
Deactivating the
keypad lock
If the display lighting is switched off, the keypad lock is activated. You
can deactivate the keypad lock by holding down the
and
but-
tons for at least 3 seconds.
If no buttons are pressed within 60 seconds of deactivating the
keypad lock, it will be reactivated again automatically.
