Installation
-
I
N
-
S
T
A
L
L
-
A
-
T
I
O
N
-
75
For additional stability of the wine con-
ditioning unit in the housing unit, push
the stabilising rods supplied in under-
neath the appliance between it and
the floor of the housing unit:
17
17
1
8
1
8
Then secure the handle
to one of
the stabilising rods
.
1
8
Push the stabilising rod
into the
guide hole as far as it will go. Remove
the handle
and fit it to the other
rod supplied and push this into its
guide as far as it will go.
Tip:
Important! Keep the handle
somewhere safe in case you ever need
to fit the wine conditioning unit into new
cabinetry.
Check that the wine conditioning unit
is standing securely in the niche and
that the door closes properly.
If not already done, remove the trans-
port safety device as follows:
19
19
Pull the door seal back a little from
the bottom corner of the door and re-
move the cover
.
20
Unscrew the transport safety
device
from the bottom of the ap-
pliance.
