The optimum temperature and air quality
26
Safety device in case of low ambient
temperatures
The appliance is equipped with a safety
thermostat to protect your wine against
a sharp drop in temperature. If the ex-
ternal temperature should fall, a heater
element switches on automatically to
keep the temperature inside as constant
as possible. If the ambient temperature
continues to fall, the appliance switches
itself off automatically.
Isolator plate for thermal separation
The unit comes with a fixed isolation
panel that partitions the interior of the
wine conditioning unit into two separate
temperature zones. This enables you to
store different types of wine at the same
time, e.g., red wine and Champagne.
The isolation strips inside the glass
door prevent the exchange of heat
between the individual zones.
Setting the temperature
The temperatures in the wine condition-
ing zones can be set independently of
one another.
Touch the sensor for the zone for
which you wish to change the tem-
perature, so that it is highlighted in
yellow.
The current temperature for the selec-
ted zone appears in the display.
Use the two sensors underneath the
display to set the temperature.
By touching the sensor
– The temperature decreases
– The temperature increases
Touch the OK sensor to confirm your
selection
or
Wait approximately 5 seconds after
the last touch of a sensor
The temperature being set will flash in
the display.
The following information shows in the
display while the sensors are being
touched:
