Miele KMDA 7476 FL Operating And Installation Instructions Download Page 65

Page: 65 / 100

Optional accessories

Miele offer a comprehensive range of
useful accessories as well as cleaning
and conditioning products for your
Miele appliances.

These can be ordered from your Miele
dealer (see end of this booklet for
contact details).

Pans

Miele offer a wide range of cookware.
These have all been optimised for Miele
aplliances in terms of functionality and
dimensions. Please contact your Miele
dealer for more details on individual
products.

Cleaning and care products

Ceramic and stainless steel hob
cleaner 250 ml

Removes heavy soiling, limescale
deposits and aluminium residues

Microfibre cloth

Removes finger marks and light soiling

Summary of Contents for KMDA 7476 FL





































































































Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands

Miele KMDA 7476 FL, Operating And Installation Instructions

Search results

Summary of Contents for KMDA 7476 FL

Reviews:

Related manuals for KMDA 7476 FL

Brands by name

Popular brands