manualshive.com logo in svg

Miele KM 7999 FL, Operating And Installation Instructions

Share
Download
Miele KM 7999 FL Operating And Installation Instructions Download Page 75

Installation

*INSTALLATION*

75

Flush-fit

Installation notes – 
flush-fit

A flush-fit hob is suitable only for in-
stallation in natural stone (granite,
marble), solid wood and tiled work-
tops. Certain models are also suitable
for building into glass worktops –
these are marked with an appropriate
note in “Installation – Flush-fit installa-
tion”. When using a worktop made
from any other material, please check
first with the worktop manufacturer
that it is suitable for installing a flush-
fit hob.

The internal width of the base unit un-
derneath the appliance must be at
least as wide as the inner worktop cut-
out (see “Installation – Flush-fit install-
ation”), so that the hob is easily ac-
cessible from underneath after install-
ation and the bottom half of the casing
can be removed for maintenance. If
the underside of the hob is not freely
accessible after installation, any seal-
ant used must be removed to enable
the hob to be lifted out of the cut-out
should this be necessary.

Natural stone worktops

The hob is set directly in the cut-out.

Solid wood worktops, tiled worktops,
glass worktops

The hob is secured inside the cut-out
with wooden battens. The battens must
be provided on site, and are not sup-
plied with the appliance.

Sealing strip

Dismantling the hob for service pur-
poses may damage the sealing strip
underneath the edge of the hob.
Always replace the sealing strip be-
fore reinstalling the hob.

Summary of Contents for KM 7999 FL





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands