manualshive.com logo in svg

Miele KM 7999 FL, Operating And Installation Instructions

Share
Download
Miele KM 7999 FL Operating And Installation Instructions Download Page 74

Installation

*INSTALLATION*

74

Installation – surface-mounted

Create the worktop cut-out. Remem-
ber to maintain the minimum safety
distances (see “Installation – Safety
distances”).

Seal any cut surfaces on 

wooden

worktops

 with a special varnish, sil-

icone sealant or resin to prevent the
wood from swelling as a result of
moisture ingress. The sealant must
be heat-resistant.

Make sure that the sealant does not
come into contact with the top of the
worktop.

Stick the supplied sealing strip under
the edge of the hob.

Feed the power cable for the hob
down through the worktop cut-out.

Place the hob centrally in the cut-out.
When doing this, make sure that the
seal of the appliance sits flush with
the worktop on all sides. This is im-
portant to ensure an effective seal all
round.

Do not use any additional sealant
(e.g. silicone) on the hob.

If the seal does not sit flush with the
worktop in the corners, the corner ra-
dius (≤ R4) can be carefully cut to fit
using a jigsaw.

Connect the hob to the power supply.

Check that the hob works.

Summary of Contents for KM 7999 FL





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands