manualshive.com logo in svg

Miele KM 7629 FX, Operating And Installation Instructions, Page: 22 / 92

Share
Download
Miele KM 7629 FX Operating And Installation Instructions Download Page 22

Guide to the appliance

22

Cooking zones

KM 7679 FR, KM 7679 FL, KM 7879 FL

Cooking

zone

Size in cm

Max. rating

in watts for 230 V

3

Linked cooking

zone

4

Ø

1

2

16–22

–

Normal
TwinBooster, level 1
TwinBooster, level 2

2300
3000
3650

10–16

–

Normal
TwinBooster, level 1
TwinBooster, level 2

1400
1700
2200

15–23

19 x 23 Normal

TwinBooster, level 1
TwinBooster, level 2

2100
3000
3650

15–23

19 x 23 Normal

TwinBooster, level 1
TwinBooster, level 2

2100
3000
3650

 + 

22–23

23 x 39 Normal

TwinBooster, level 1
TwinBooster, level 2

3400
4800
7300

-

Total

7300

1

Cookware with a base diameter within the given range may be used.

2

The given range corresponds to the maximum base surface of the cookware that may be used.

3

The power given may vary depending on the size and material of the cookware used.

4

The cooking zone is linked to this cooking zone electrically so that the rating can be increased; see
“Operation – Power management”.

Summary of Contents for KM 7629 FX





























































































Reviews:

No comments