manualshive.com logo in svg

Miele KM 7564 FL, Operating And Installation Instructions, Page: 53 / 100

Share
Download
Miele KM 7564 FL Operating And Installation Instructions Download Page 53

Additional functions

53

Wipe protection

The hob sensors can be locked for
20 s in order, for example, to remove
soiling. The 

 is not locked.

Activating

Touch the 

 sensor.

The time will count down in the timer
display.

Deactivating

Touch the 

 sensor until the timer

display goes out.

Demonstration mode

This function enables the hob to be
demonstrated in showrooms without
heating up.

Activating / Deactivating

Switch the hob on.

Touch the 0 sensor control on any of
the numerical keybanks.

Then touch the 0 and 2 sensors at
the same time for 6 seconds.

In the timer display, 



 flashes altern-

ately with 



 (demonstration mode ac-

tivated) or 



 (demonstration mode de-

activated) for a few seconds.

Displaying hob data

The model number and software ver-
sion of the hob can be displayed. There
must not be any pots or pans on the
cooking zones.

Model number/Serial number

Switch the hob on.

Touch the 0 sensor control on any of
the numerical keybanks.

Touch the 0 and 4 sensor controls at
the same time.

Numbers will appear in the timer display
one after another, separated by a dash.

Example: 



 



 (model number

KM 1234) – 

 



 



 



 



 (serial num-

ber)

Software version

Switch the hob on.

Touch the 0 sensor control on any of
the numerical keybanks.

Touch the 0 and 3 sensor controls at
the same time.

Numbers appear in the timer display:

Example: 

:

 = Software version 2.00

Summary of Contents for KM 7564 FL





































































































Reviews:

No comments