Miele KM 6520 FL, Operating And Installation Instructions

Page: 33 / 80

Operation
33
Auto heat-up
When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected. The heat-up time depends on
which continued cooking setting has
been chosen (see chart).
Activating Auto heat-up
 Briefly touch the display for the
required cooking zone.
 Touch the sensor for the continued
cooking setting you want until a tone
sounds and

lights up in the cooking
zone display.
The  symbol flashes alternately with
the power setting selected in the
cooking zone display during the heat-
up time (see chart).
Changing the continued cooking
setting while the cooking zone is
heating up deactivates Auto heat-up.
Deactivating Auto heat-up

Briefly touch the display for the
required cooking zone.
 Touch the continued cooking setting
you have set until the

goes out.
or
 Set another power level.
Continued
cooking setting*
Heat-up time
[min : sec]
1 1:20
1. 2:00
2 2:45
2. 3:25
3 4:05
3. 4:45
4 5:30
4. 6:10
5 6:50
5. 7:10
6 1:20
6. 2:00
7 2:45
7. 2:45
8 2:45
8. 2:45
9 –
* The continued cooking settings with a dot
after the number are only available if the
power level range has been extended (see
“Programming”). As the higher continued
cooking settings are generally used for
frying food, only a relatively short heat-up
time is needed to heat up the pan initially.