Miele KM 6520 FL, Operating And Installation Instructions

Page: 32 / 80

Operation
32
Switching on an extended
zone/outer ring
Double circle cooking zone or single
circle cooking zone/extended zone:
When you switch on a double circle
cooking zone or an extended zone, the
second heating circle is always
switched on automatically.
Triple circle cooking zone:
When you switch on a triple cooking
zone, the second heating circle is
always switched on automatically. The
third heating circle must be switched on
manually.
Indicator light:
On hobs with only one multi-circle
cooking zone or a single circle cooking
zone/extended zone, the indicator light
to show that these are switched on
lights up constantly.
On hobs with two or more multi-circle
cooking zones/and single circle cooking
zones/extended zones, the indicator
light to show that these are switched on
only lights up while the cooking zone
indicator is flashing. There is no
difference in the indicator between the
second and the third heater element of
a triple cooking zone.
An additional heating circle can only
be switched on or off if the
corresponding cooking zone indicator
is flashing. Exception: the hob only
has one multi-circle cooking zone or a
single circle cooking zone/extended
zone.
Switching the heater element off
 Briefly touch the display for the
required cooking zone.
The cooking zone display starts to flash
and the indicator light for the extended
outer zone lights up.
 While the cooking zone display is
flashing, touch the
 sensor
repeatedly until the indicator light for
the extended outer zone goes out.
Switching the heater element on

Briefly touch the display for the
required cooking zone.
The cooking zone display will begin to
flash.
 Touch the  control whilst the
cooking zone display is flashing.
The indicator light for the extended /
outer zone will light up.

Set the power level you want.