manualshive.com logo in svg

Miele KM 6113, Operating And Installation Instructions

Share
Download
Miele KM 6113 Operating And Installation Instructions Download Page 34

Timer

34

The hob has to be switched on if you
wish to use the timer.
You can set a time between 1 minute
(



) and 9.5 hours (

.

).

The timer can be used for two different
functions:

- to set the minute minder

- to set a cooking zone to switch off

automatically.

Use the 

-

 sensor to reduce the time

from 

.

 to 



, and the 

+

 sensor to in-

crease the time from 



 to 

.

. The dis-

play stops at 

.

 and at 



. To continue

beyond this setting, briefly remove your
finger from the sensor and then touch it
again.
Durations exceeding 99 minutes are set
in half-hour steps. The half hour is in-
dicated by a dot after the number.

Minute minder

Setting

Touch the 

 sensor.



 and the minute minder indicator

lamp will flash in the timer display.

Select the time you want with the 

-

 or

+

 sensor.

Changing

Touch the 

 sensor.

Select the time you want with the 

-

 or

+

 sensor.

Deleting

Touch the 

 sensor.

Touch the 

-

 and 

+

 sensors at the

same time until 



 appears in the

timer display.

Summary of Contents for KM 6113













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands