manualshive.com logo in svg

Miele KM 6113, Operating And Installation Instructions

Share
Download
Miele KM 6113 Operating And Installation Instructions Download Page 33

Operation

33

Keeping warm

This function is for keeping food warm
which has just been cooked and is still
hot. It is not for reheating food that
has gone cold.

The maximum duration for keeping food
warm is 2 hours.

- Only use pans for keeping food

warm. Cover the pan with a lid.

- Stir firm or viscous food (mashed

potatoes, stew) occasionally.

- Nutrients are lost when food is

cooked, and continue to diminish
when food is kept warm. The longer
food is kept warm, the greater the
loss of nutrients. Try to ensure that
food is kept warm for as short a time
as possible.

Setting the keeping warm function

Touch the sensor for selecting the
cooking zone you want.

Touch the + sensor until 

 appears in

the cooking zone display.

To switch off the keeping warm func-
tion

Touch the sensor for selecting the
cooking zone you want.

Set a different power level or switch
the cooking zone off.

Summary of Contents for KM 6113













































































Reviews:

No comments

Brands by name

Popular brands

Load more brands