Miele KM 6113, Operating And Installation Instructions

Page: 29 / 76

Operation
29

Risk of fire with overheated food.
Unattended food can overheat and
catch alight.
Do not leave the hob unattended
whilst it is being used.
Please note that the heating up time
on induction hobs is very much
shorter than on conventional hobs.
Switching on

Touch the

sensor.

will appear in each of the cooking
zone displays and  will appear in the
timer display. If there is no further input,
the hob will switch itself off after a few
seconds for safety reasons.
Selecting/changing the power
level

Touch the sensor for selecting the
cooking zone you want briefly.

or the selected power level will flash
in the cooking zone display.
 Touch the + or - sensor repeatedly
until the power level you want ap-
pears in the cooking zone display.
The power level selected will flash in the
display for a few seconds to start with
and then light up constantly.
Setting the power level with - will se-
lect cooking with Auto heat-up. Set-
ting the power level with
+ will select
cooking without Auto heat-up (see
“Auto heat-up”).
Switching off

To switch a cooking zone off, touch
the sensor for that cooking zone
twice.

To switch off the hob and all the
cooking zones, touch the
 sensor.
Residual heat indicator
If the cooking zone is still hot, the resid-
ual heat indicator will light up after it
has been switched off.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.

Risk of burning due to hot cook-
ing zones.
The cooking zones will be hot after
use.
Do not touch the cooking zones
while the residual heat indicators are
on.