Operation
23
Fire hazard!
Do not leave the cooktop unattended
during operation!
Please note that the heating-up time
for induction cooktops is shorter
than for conventional cooktops.
Cooking zone rotary controls
The cooking zone rotary controls must
not be turned past B I to
or
or to
0.
Switching on
Turn the cooking zone rotary control
clockwise until the setting you want
appears in the display.
Switching off
Turn the rotary control anti-clockwise
to 0.
The power setting will go out in the
display.
Residual heat indicator
When a cooking zone is hot, the
residual heat indicator will light up after
deactivation.
The lines of the residual heat indicator
go out one after another as the cooking
zone cools down. The last horizontal
line only goes out when the cooking
zone is safe to touch.
