manualshive.com logo in svg

Miele KM 5603, Operating And Installation Instructions

Share
Download
Miele KM 5603 Operating And Installation Instructions Download Page 43

Programming

43

You can adapt the programming of the
cooktop to your personal needs.
Several settings can be altered in
succession.

After accessing programming mode, 

(Programme), 

 (Status) and numbers

will appear in the cooking zone
displays.

After the programming function is
exited, an automatic reset is
performed. The process is completed
when the safety lock / outer zone
indicator lights light up briefly.
Do not turn the cooking zone on until
the reset is concluded.

Calling up programming

With the 

cooktop switched off

 touch

the 

 and 

 or 

 sensors until the

indicator light flashes above the
symbol.

Setting a programme

Touch the 

(front) left

 cooktop sensor.

Set the programme you want with the

+

 or 

-

 sensor.

Setting the status

Touch the sensor for selecting the

front right

 cooking zone.

Set the Status you want with the 

+

 or

-

 sensor.

How to save the settings

Touch the 

 sensor until the displays

go out.

How to avoid saving the
settings

Touch the 

 or 

 sensor until the

indicators go out.

Summary of Contents for KM 5603









































































Reviews:

No comments

Brands by name

Popular brands

Load more brands