Adjusting the interior fittings
48
Adjusting the door shelf/bottle
shelf
Tip:
Only move the door shelves/bottle
shelves in the door when they are
empty.
Push the door shelf/bottle shelf
upward, then remove it by pulling it
forward.
Replace the shelf at the required
height. Ensure that it is securely
pushed back into position.
Adjusting the bottle holder
The bottle holder can be moved left or
right to create more room for drink
cartons.
The bottle holder can be removed
completely, for example for cleaning:
Lift up the bottle shelf and pull it out.
Detach the bottle holder from the
back edge of the bottle shelf.
Moving the shelf/shelf with
lighting
By adjusting the position of the shelf
with lighting in the refrigerator section,
you can change the illumination in this
section as required.
Stops prevent the shelves from being
dislodged by mistake.
The shelves can be adjusted
according to the height of the food:
1. Lift the shelf up slightly at the front.
2. Pull it forward a little and lift it until
the notch at the side is in line with
the shelf support. It can then be
raised or lowered to the required
level.
Push in the shelf until it clicks into
position.
The raised edge on the protective strip
at the back must face upward to
prevent food from touching the back
of the appliance and freezing to it.
Summary of Contents for KFNS 37692 iDE-1
Page 118: ......
