Selecting additional settings
38
Now touch the
or
sensors to
select:
0
: keypad tone off; door alarm off
1
: keypad tone off; door alarm on
(after 4 minutes)
2
: keypad tone off; door alarm on
(after 2 minutes)
3
: keypad tone on; door alarm on
(after 2 minutes)
Touch the OK sensor to confirm the
selection.
The selected setting is applied; the
symbol flashes.
Touch the settings sensor to exit
settings mode.
If you do not do this, the appliance
electronics will exit settings mode
automatically after approximately
1 minute.
Display brightness
You can adjust the brightness of the
display to suit the ambient light
conditions in the room.
The display brightness can be adjusted
incrementally from
1
to
3
. The factory
default setting is
3
(maximum
brightness).
Changing the brightness of the
display
Touch the settings sensor.
All symbols available for selection will
appear in the display and the
symbol flashes.
Touch the sensors for setting the
temperature (
or
) repeatedly until
the
symbol flashes in the display.
Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the
symbol lights up in the display.
Summary of Contents for KFNS 37692 iDE-1
Page 118: ......
