Installation
*INSTALLATION*
113
Water connection
Information on the fresh water
connection
Risk of injury and appliance
damage if appliance is not
connected properly.
Failing to connect the appliance
properly can result in personal injury
and/or material damage.
The appliance may only be
connected to the fresh water
connection by qualified technicians.
Disconnect the refrigeration
appliance from the power supply
before connecting it to the water
supply.
Close the faucet before connecting
the refrigeration appliance to the
water supply.
Risk to health and risk of
damage due to contaminated water.
The quality of the incoming water
must conform to the requirements for
drinking water in the country where
the refrigeration appliance is being
used.
Connect the refrigeration appliance
to the drinking water supply.
Connection to the water supply must
comply with the applicable
regulations in the country where the
appliance is being installed. All
appliances and systems used to
supply water to the refrigeration
appliance must also comply with the
applicable regulations in the
respective country.
The water connection pressure needs
to be between 21 and 87 psi (1.5 and
6 bar).
Use fresh water to ensure that the
quality of the ice cubes remains high.
Connect the stainless steel hose to
the fresh water supply and avoid
connection to a water supply in
which the water might stagnate.
Only use the stainless steel hose
supplied. The stainless steel hose
must not be shortened, extended, or
replaced by a different hose.
The stainless steel hose must only
be replaced by an original Miele part.
The food-grade, stainless steel hose
is available to order from the Miele
online shop, from Miele Customer
Service, or from your local Miele
dealer.
A faucet must be provided between the
stainless steel hose and the fresh water
supply to ensure that the water supply
can be cut off if necessary.
Make sure that the faucet is still
accessible after the appliance has
been installed.
Summary of Contents for KFNS 37692 iDE-1
Page 118: ......
