Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
97
Limiting the opening angle of
the appliance doors
The door hinges are set to enable the
appliance doors to be opened wide.
However, if the opening angle of the
doors needs to be limited for any
reason, the hinge can be adjusted to
accommodate this.
If, for example, the appliance doors hit
an adjacent wall when they are opened,
you should limit the opening angle of
the appliance doors to approx. 90°.
The locking pins for limiting the door
opening must be fitted before the
refrigeration appliance is installed.
The refrigerator section door must be
taken off in order to insert the pins into
the upper hinge of the freezer section
door.
Insert the locking pins supplied for
limiting the door opening into the
hinges from above.
The appliance door opening angle is
now limited to approx. 90°.
Changing the door hinging
Two people are needed for changing
the door hinging.
The appliance is supplied right-hand
hinged. If left-hand hinging is required,
the hinges must be changed.
To change the door hinging, you will
need the following tools:
