Selecting further settings
39
Touch the
or
sensor now to
select:
0
: keypad tone off; door alarm off
1
: keypad tone off; door alarm on
(after 4 minutes)
2
: keypad tone off; door alarm on
(after 2 minutes)
3
: keypad tone on; door alarm on
(after 2 minutes).
Touch the OK sensor to confirm the
selection.
The selected setting is applied, the
symbol flashes.
Touch the settings sensor to exit
settings mode.
Otherwise, the appliance electronics
will exit the settings mode
automatically after approximately one
minute.
Display brightness
The display brightness can be adjusted
to suit lighting conditions in the room.
The display brightness can be adjusted
in steps from
1
to
3
. The factory default
setting is
3
(maximum brightness).
Altering the display brightness
Touch the settings sensor.
All symbols available for selection will
appear in the display and the
symbol flashes.
Touch the sensors for setting the
temperature (
or
) repeatedly until
the
symbol flashes.
Touch the OK sensor to confirm your
selection.
The last selected setting flashes and
the
symbol lights up in the display.
