Selecting further settings
44
Setting the time before the door
alarm
is triggered
The refrigeration appliance has a door
alarm. If a door is open for a longer
period of time an alarm will sound (if
this has not been switched off: see
“Setting the volume/Switching alarms
and audible tones on/off”) and
will
light up in the display (see “Temperature
and door alarm – Door alarm”).
You can set the time before the door
alarm
sounds with the segment bar:
The time can be set in 30-second
increments, starting with 30 seconds
(level 1 = 1 filled-in segment) up to a
maximum of 3 minutes 30 seconds
(level 7 = 7 filled-in segments).
Switching the sensor tone
on /
off
Every time a selectable field is touched
a sensor tone sounds. You can switch
this on
or off
.
Setting the volume/Switching alarms
and audible tones
on/off
You can set the volume of the alarms
and audible tones in the segment bar:
If all segments are filled in, the
maximum volume is set.
If no segments are filled in, the alarm
and audible tones are switched off.
appears.
You will hear the volume change as it is
adjusted.
Alarms and audible tones for
temperature alarms, error messages,
interruptions to the power supply or a
set minute minder cannot be switched
off.
Setting the display brightness
You can set the display brightness in
the segment bar:
If all segments are filled in, the
maximum brightness is selected.
You will see the brightness change as it
is being adjusted.
Setting the temperature unit °C/°F
You can choose between degrees
Celsius
°C
and degrees Fahrenheit
°F
for the temperature display.
Summary of Contents for KFN 29243 D ed/cs
Page 101: ......
Page 102: ......
Page 104: ...M Nr 10 360 600 04 en GB KFN 29233 D ws KFN 29233 D edt cs KFN 29243 D ed cs ...
