Cleaning and care
50
Appliance front
The appliance front has a high quality,
special finish (CleanSteel). It is resistant
to soiling and is very easy to clean.
Do not use stainless steel
cleaning agent
on this surface. This
would damage the coating.
Do not use stainless steel condi-
tioning agent
on this surface. It will
cause noticeable smearing.
Cleaning the door seals
If a door seal is damaged or if it
has come out of the groove, the door
will not close properly and cooling
performance will be reduced.
Condensate will build up in the in-
terior and this can cause a build-up
of ice.
Do not damage door seals and en-
sure that they do not come out of
their groove.
Do not use any grease or oil on door
seals as these will cause them to de-
teriorate and become porous over
time.
Door seals should be cleaned regu-
larly with clean water, and then wiped
dry with a soft cloth.
After cleaning
Replace all shelves and accessories
in the appliance.
Reconnect to the mains and switch
the appliance back on.
Switch on the Super freeze function
for a while so that the freezer section
can cool down quickly.
Switch on the Super cool function for
a while so that the refrigerator section
can cool down quickly.
Place food in the refrigerator section
and close the door.
Place the freezer drawers with the
frozen food back in the freezer sec-
tion and close the door.
When the temperature in the freezer
section is a constant -18 °C or colder
press the Super freeze button to
switch the Super freeze function off.
