Switching on and off
58
Switching on the appliance
Open the appliance door.
Turn the appliance on by pressing the
On/Off switch.
°F
39
°F
39
0
°F
The appliance will start to cool and the
interior lighting will come on when the
appliance door is opened.
Miele
will then appear on the main
screen in the appliance display.
The message
Freezer temperature too
high. Max. temperature °F
will appear in
the display when the appliance is
switched on for the first time and the
selected freezer temperature has been
reached.
An alarm tone sounds.
Confirm the message with
OK
.
The message disappears from the dis-
play and the alarm tone stops.
However, the message may reappear
on the display after a brief delay.
As soon as the selected freezer temper-
ature has been reached, the message
will disappear completely from the dis-
play and the alarm tone will stop.
To enable the temperature to get suf-
ficiently cold inside the appliance, al-
low the appliance to run for a few
hours before placing food in it. Do
not place food in the Freezer Zone
until it has reached the required cold-
ness (at least 0°F/-18°C).
Switching off the appliance
Turn the appliance off by pressing the
On/Off switch.
The cooling and interior lighting are
switched off.
Please note: The appliance is not
disconnected from the power supply
when the on/off switch is in the “off”
position.
Summary of Contents for KF 2801 SF
