Changing the door hinging
56
The appliance is supplied left-hand
hinged. If right-hand hinging is required,
the hinges must be changed.
Do not change the hinging if this appli-
ance is going to be installed side-by-
side with another refrigeration appli-
ance.
Two people are needed for chan-
ging the door hinging.
If a door seal is damaged or if it
has come out of the groove, the door
will not close properly and cooling
performance will be reduced.
Condensate will build up in the in-
terior and this can cause a build-up
of ice.
Do not damage the door seals and
ensure that they do not come out of
their groove.
Preparation
To change the door hinging, you will
need the following tools:
Place a suitable cover on the floor in
front of the appliance to protect the
appliance door and your floor from
damage.
Removing the top covers
Close the appliance door.
Remove cover
by sliding it for-
wards from the back and then lifting it
off.
Remove cover
by pulling it up-
wards.
Danger of injury when removing
the appliance door.
The appliance door is not secure
once the hinge plate has been re-
moved.
The door must be held by a second
person.
Summary of Contents for K 28202 D edt/cs
Page 61: ......
Page 62: ......
Page 64: ...M Nr 10 538 950 00 en GB K 28202 D ws K 28202 D edt cs ...