Miele K 2601 Vi Operating And Installation Instructions Download Page 91

Page: 91 / 116

Adjusting the interior fittings

Removing the hanging drawer

The hanging drawer can be moved to
the left or right if required.

To clean the hanging drawer, remove it
as follows:



Pull the hanging drawer straight out
to lift it over the pull-out stops on
both sides.



To reinsert the hanging drawer, push
it straight into the guide.

Moving the hanging drawer

The hanging drawer can be fixed under
any shelf in the refrigerator section.



Pull the hanging drawer out.



To remove the holder for the hanging
drawer, press against the retainers on
both sides of the holder from the rear
and pull the holder downwards diag-
onally from the frame.



To replace the holder, press against
the retainers on both sides of the
holder from the rear and clamp it into
the gap on the frame from below.



Put the hanging drawer back in.

Summary of Contents for K 2601 Vi





















































































































Search results

Summary of Contents for K 2601 Vi

Reviews:

Related manuals for K 2601 Vi

Brands by name

Popular brands

Miele K 2601 Vi, Operating And Installation Instructions

Search results

Summary of Contents for K 2601 Vi

Reviews:

Related manuals for K 2601 Vi

Brands by name

Popular brands