Selecting additional settings
73
Performing a Self test
Perform a
Self test
if you are concerned
that your refrigeration appliance is not
working properly and want to check if it
is suffering from any problems.
In Settings mode
, use the
and
sensor controls to select
Self
test
and select
OK
to confirm your se-
lection.
Touch the
sensor control if you
wish to terminate the process.
The
Self test
starts and the refrigeration
appliance is checked for any faults or
malfunctions.
– The message
System restart
will ap-
pear on the display if the self test
does not discover any faults or mal-
functions.
– If the self test does discover any
faults or malfunctions, they are indic-
ated as error messages on the dis-
play.
An alarm will also sound.
If you find the alarm disruptive, you
can switch it off in advance by touch-
ing the
sensor control.
Make a note of the error message(s)
displayed.
Contact the Miele Customer Service
Department and inform them of the
error message(s) on the display.
Confirm the message with
OK
.
System restart
will appear on the display.
The refrigeration appliance briefly
switches off and then back on automat-
ically.
Self test completed
will appear on the dis-
play.
Confirm the message with
OK
.
The main screen will appear on the dis-
play again.
Summary of Contents for K 2601 Vi
Page 30: ...Installation I N S T A L L A T I O N 30 K 2801 Vi K 2811 Vi 756 mm 2029 mm 102 132 mm ...
Page 31: ...Installation I N S T A L L A T I O N 31 K 2901 Vi K 2911 Vi 908 mm 2029 mm 102 132 mm ...
Page 114: ......
Page 116: ...M Nr 11 273 020 00 en GB K 2601 Vi K 2611 Vi K 2801 Vi K 2811 Vi K 2901 Vi K 2911 Vi ...
