Selecting additional settings
72
Adjusting the temperature in
the MasterFresh zone (dry
compartment)
In Settings mode
, use the
and
sensor controls to se-
lect
MasterFresh
and select
OK
to
confirm your selection.
Use the
and
sensor controls to
select the desired temperature and
touch
OK
to confirm your selection.
Touch the
sensor control if you
wish to terminate the process.
The segment bar displays 5 segments;
the temperature is adjusted in incre-
ments of approx. 1 °C.
The factory default setting for the tem-
perature in the dry compartment is
0 °C.
Switching Eco mode
on or
off
Eco mode
is useful when you go on holi-
day, for example, if you do not wish to
switch off the refrigeration appliance
completely or do not need a high de-
gree of cooling. Energy consumption
in
Eco mode
is lower than in normal op-
eration.
The refrigerator section is thereby regu-
lated to a temperature of 6 °C and the
dry compartment in the MasterFresh
zone to approx. 1 °C.
If the SuperCool
function is switched
on, this will be automatically switched
off when
Eco mode
is selected.
In Settings mode
, use the
and
sensor controls to select
Eco
mode
and select
OK
to confirm your
selection.
Use the
and
sensor controls to
switch the
Eco mode
On
or
Off
and se-
lect
OK
to confirm your selection.
Only the changed temperature on the
display indicates that
Eco mode
is
switched on.
Tip:
You can also switch off the
Eco
mode
function by directly adjusting the
temperature
(see “The correct tem-
perature – Setting the temperature”).
Summary of Contents for K 2601 Vi
Page 30: ...Installation I N S T A L L A T I O N 30 K 2801 Vi K 2811 Vi 756 mm 2029 mm 102 132 mm ...
Page 31: ...Installation I N S T A L L A T I O N 31 K 2901 Vi K 2911 Vi 908 mm 2029 mm 102 132 mm ...
Page 114: ......
Page 116: ...M Nr 11 273 020 00 en GB K 2601 Vi K 2611 Vi K 2801 Vi K 2811 Vi K 2901 Vi K 2911 Vi ...
