Installation
*
I
N
S
T
A
L
L
A
T
I
O
N
*
55
Building under
The refrigeration appliance can be
pushed under a worktop. If this is done,
the refrigeration appliance lid must first
be removed.
Risk of fire and damage due to
insufficient ventilation.
If the refrigeration appliance is not
ventilated sufficiently, the com-
pressor will run more frequently and
for longer periods. This will result in
increased energy consumption and a
higher operating temperature for the
compressor. This may, in turn, cause
damage to the compressor.
Please ensure that there is adequate
ventilation around the refrigeration
appliance.
It is essential to observe the required
ventilation gaps. The ventilation gaps
must not be covered or blocked in
any way.
If your appliance is supplied with wall
spacers, these must not be used if the
appliance lid has been removed (see
“Installation – Location”).
With a building-under depth of
600 mm, any back mould on the work-
top must not exceed 10 mm in depth.
To remove the lid, unscrew the
screws
from the back of the refri-
geration appliance.
Lift the appliance lid up at the back
and then pull it forwards to remove it.
