Features
30
FlexiClips with wire rack
HFCBBR 30-2
The wireless roast probe antenna on
the top right of the oven interior is at
risk of damage when sliding the
FlexiClips with wire rack in at level 6.
Only use the FlexiClips with wire rack
at levels 1 to 5.
The FlexiClips with wire rack can be
pulled completely out of the oven. This
allows you to see the food easily.
The FlexiClips with wire rack are
pushed onto the rails of a level and then
locked into place.
The FlexiClips can support a maximum
load of 33 lb (15 kg).
Installing and removing the FlexiClips
with wire rack
Danger of burning!
The heater elements must be turned
off. Make sure the oven has cooled
down.
When installing the FlexiClips,
do not
extend them.
Hold the FlexiClips with wire rack with
both hands and position it in front of
the desired level.
Insert the FlexiClips with wire rack
onto the level (1.) and slide it along
the struts of the level (2.) until it clicks
into place.
If the FlexiClips with wire rack jams
when sliding it onto the level, pull it
out using some force and reinsert.
To remove the FlexiClips with wire rack:
Push the FlexiClips with wire rack in
all the way.
Using both hands lift the front of the
FlexiClips with wire rack on both
sides (1.) and pull it out of the level
(2.).
Using the universal tray
When using the universal tray, place it
directly on the FlexiClips with wire
rack.
Summary of Contents for HR 1924-2
Page 130: ......
